OLD RODIN 4D scanner

skoppendrayer greatstepsop.com

Description

Title:

OLD RODIN 4D scanner

Creator:

skoppendrayer greatstepsop.com

Date:

4/23/2021

Text:

Anyone still use an old Rodin 4D scanner. I am still using one for scanning my cranials. I have no tech support for the scanner and I am using very basic FAST SCAN software. I need to know how to calibrate the machine as I tried the other day and screwed it up.
Anyone have any suggestions?

Stephanie Koppendrayer, BSN, CFo, CFts

Great Steps Orthotics & Prosthetics

154 19th St. S

Sartell, MN 56377

320-229-1742


Confidentiality Notice: This e-mail and any attachment may contain confidential information that is legally privileged. This information is intended only for the use of the individual or entity named above. The authorized recipient of this information is prohibited from disclosing this information to any other party unless required to do so by law or regulation. If you are not the intended recipient, you are hereby notified any disclosure, copying, distribution or action taken in reliance on the contents of these documents is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, reply to this transmission, or contact the Great Steps Orthotics & Prosthetics Privacy Officer at (320) 229-1742 and delete these documents.

                          

Citation

skoppendrayer greatstepsop.com, “OLD RODIN 4D scanner,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 24, 2024, https://library.drfop.org/items/show/255490.