Old carvers with new software
Tony Culver
Description
Collection
Title:
Old carvers with new software
Creator:
Tony Culver
Date:
4/22/2021
Text:
Dear List,
Who out there is still using an old PDI or ART carver with centroid box and Tracer version 12 (no longer supported) or shapemaker ( no longer supported)? What are you doing when these software companies are no longer supported? It seems that the new software companies are developing their software to only work with their carver. It would be nice to have these software companies develop a universal file format to communicate with other carvers like they did in the beginning with .aop format on the software side. We have been using Tracer and shapemaker set-up for 30 years and will be purchasing new software but it seems that the new software will not communicate with our older carvers. Has anyone converted a carver to work with a new software? It's hard to throw out 300k worth of old technology in carvers to just buy a new carver that does the same function for 100k -300k.
Thank you,
Tony Culver
President / Owner
[cid: <Email Address Redacted> ]< <URL Redacted> >
P: 800-940-5347 F: 727-842-2264
M: 727-534-3915
E: <Email Address Redacted> <mailto:<Email Address Redacted>> / <Email Address Redacted> <mailto:<Email Address Redacted>>
W: <URL Redacted>
[A picture containing food Description automatically generated]
7928 Rutillio Court
New Port Richey, FL 34653
UNITED STATES
[Instagram-v051916_200]< <URL Redacted> >[Image result for linkedin icon for email]< https://urldefense.proofpoint.com/v2/url?u=http-3A__www.linkedin.com_in_tony-2Dculver-2Dgpfinc&d=DwIFAg&c=sJ6xIWYx-zLMB3EPkvcnVg&r=KmuawjwNpT9A2bnhzaNVjw8wO7L_TDosEXIk33h_tlw&m=JYXO84jIUOiZVsLKSQBIyogsqlODVUewryRBI3Q5T94&s=HH8HXr7snlVEC5Q9Rcvjn5sdAbwyRPgdxG2LICBZ78E&e= >[Title: Facebook - Description: image of Facebook icon]< https://urldefense.proofpoint.com/v2/url?u=https-3A__www.facebook.com_GraceProstheticFab_&d=DwIFAg&c=sJ6xIWYx-zLMB3EPkvcnVg&r=KmuawjwNpT9A2bnhzaNVjw8wO7L_TDosEXIk33h_tlw&m=JYXO84jIUOiZVsLKSQBIyogsqlODVUewryRBI3Q5T94&s=EGNf_jhIEeoD6xtTLDUHKOh8iLn43rRqJRzW10hBAPY&e= >
[A close up of a sign Description automatically generated]
The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party without a written consent of the sender. If you received this message by mistake, please reply to tis message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
Confidentiality Notice: The information contained in this transmission may contain privileged and confidential information, including patient information protected by federal and state privacy laws. It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Who out there is still using an old PDI or ART carver with centroid box and Tracer version 12 (no longer supported) or shapemaker ( no longer supported)? What are you doing when these software companies are no longer supported? It seems that the new software companies are developing their software to only work with their carver. It would be nice to have these software companies develop a universal file format to communicate with other carvers like they did in the beginning with .aop format on the software side. We have been using Tracer and shapemaker set-up for 30 years and will be purchasing new software but it seems that the new software will not communicate with our older carvers. Has anyone converted a carver to work with a new software? It's hard to throw out 300k worth of old technology in carvers to just buy a new carver that does the same function for 100k -300k.
Thank you,
Tony Culver
President / Owner
[cid: <Email Address Redacted> ]< <URL Redacted> >
P: 800-940-5347 F: 727-842-2264
M: 727-534-3915
E: <Email Address Redacted> <mailto:<Email Address Redacted>> / <Email Address Redacted> <mailto:<Email Address Redacted>>
W: <URL Redacted>
[A picture containing food Description automatically generated]
7928 Rutillio Court
New Port Richey, FL 34653
UNITED STATES
[Instagram-v051916_200]< <URL Redacted> >[Image result for linkedin icon for email]< https://urldefense.proofpoint.com/v2/url?u=http-3A__www.linkedin.com_in_tony-2Dculver-2Dgpfinc&d=DwIFAg&c=sJ6xIWYx-zLMB3EPkvcnVg&r=KmuawjwNpT9A2bnhzaNVjw8wO7L_TDosEXIk33h_tlw&m=JYXO84jIUOiZVsLKSQBIyogsqlODVUewryRBI3Q5T94&s=HH8HXr7snlVEC5Q9Rcvjn5sdAbwyRPgdxG2LICBZ78E&e= >[Title: Facebook - Description: image of Facebook icon]< https://urldefense.proofpoint.com/v2/url?u=https-3A__www.facebook.com_GraceProstheticFab_&d=DwIFAg&c=sJ6xIWYx-zLMB3EPkvcnVg&r=KmuawjwNpT9A2bnhzaNVjw8wO7L_TDosEXIk33h_tlw&m=JYXO84jIUOiZVsLKSQBIyogsqlODVUewryRBI3Q5T94&s=EGNf_jhIEeoD6xtTLDUHKOh8iLn43rRqJRzW10hBAPY&e= >
[A close up of a sign Description automatically generated]
The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party without a written consent of the sender. If you received this message by mistake, please reply to tis message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
Confidentiality Notice: The information contained in this transmission may contain privileged and confidential information, including patient information protected by federal and state privacy laws. It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Citation
Tony Culver, “Old carvers with new software,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 24, 2024, https://library.drfop.org/items/show/255489.
