Just a wild idea for removal of test socket from model

Lane Ferrin

Description

Title:

Just a wild idea for removal of test socket from model

Creator:

Lane Ferrin

Date:

1/4/2012

Text:

This is a technical issue that I have been kicking around for awhile.
 Blowing a TT socket off of a model with air is usually only effective for
the first 1/2 of travel as the air then can escape. I have tried
injecting water but it is not much better and messy. My instincts tell me
a very low viscosity material like Playdoh, injected into the distal end
would push the socket off and be easily cleaned up and the Playdoh
recycled. Any thoughts?
Lane Ferrin CP

                          ********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.

If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>

OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.

Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.

Citation

Lane Ferrin, “Just a wild idea for removal of test socket from model,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 1, 2024, https://library.drfop.org/items/show/233266.