Re: Corset Stay for Prosthetic fitting
JEFFREY MCDONALD atlanticp&
Description
Collection
Title:
Re: Corset Stay for Prosthetic fitting
Creator:
JEFFREY MCDONALD atlanticp&
Date:
9/13/2005
Text:
Mark,
Please post if you find a source for the stay.
By the way....
There was a gentleman at a Natl' Assembly in '97? Who demonstrated a
pressure measurement device using small wafer sensors placed over the bony
prominence. The device allowed one to document the reduction in pressure
after adjustment was made. Granted, the numbers were somewhat arbitrary,
but at least one could rest assured that the pressure had been reduced.
We bought one and used it for some time at the facility where I worked.
Anyone remember this??
Jeff McDonald CP
-----Original Message-----
From: Orthotics and Prosthetics List [mailto:<Email Address Redacted>] On
Behalf Of Mark Maguire
Sent: Tuesday, September 13, 2005 8:47 AM
To: <Email Address Redacted>
Subject: [OANDP-L] Corset Stay for Prosthetic fitting
Can anyone help me locate a very thin, flexible corset stay that
Prosthetists can use to identify pressure areas within sockets; I
understand corset manufacturers are no longer making this style of stay?
If this type of stay has in fact been discontinued does anyone have a
stock of older corsets (with this style of stay) that they may be
willing sell? Any assistance is appreciated. Thank you.
Mark T. Maguire, CPO
Advanced Prosthetics Center, LLC
Omaha, NE 68106
Phone: 402-399-9993
Fax: 402-778-9739
Please post if you find a source for the stay.
By the way....
There was a gentleman at a Natl' Assembly in '97? Who demonstrated a
pressure measurement device using small wafer sensors placed over the bony
prominence. The device allowed one to document the reduction in pressure
after adjustment was made. Granted, the numbers were somewhat arbitrary,
but at least one could rest assured that the pressure had been reduced.
We bought one and used it for some time at the facility where I worked.
Anyone remember this??
Jeff McDonald CP
-----Original Message-----
From: Orthotics and Prosthetics List [mailto:<Email Address Redacted>] On
Behalf Of Mark Maguire
Sent: Tuesday, September 13, 2005 8:47 AM
To: <Email Address Redacted>
Subject: [OANDP-L] Corset Stay for Prosthetic fitting
Can anyone help me locate a very thin, flexible corset stay that
Prosthetists can use to identify pressure areas within sockets; I
understand corset manufacturers are no longer making this style of stay?
If this type of stay has in fact been discontinued does anyone have a
stock of older corsets (with this style of stay) that they may be
willing sell? Any assistance is appreciated. Thank you.
Mark T. Maguire, CPO
Advanced Prosthetics Center, LLC
Omaha, NE 68106
Phone: 402-399-9993
Fax: 402-778-9739
Citation
JEFFREY MCDONALD atlanticp&, “Re: Corset Stay for Prosthetic fitting,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 24, 2024, https://library.drfop.org/items/show/225374.