OPGA ADDS NEW MAS COURSE CSUDH
Jim Andreassen
Description
Collection
Title:
OPGA ADDS NEW MAS COURSE CSUDH
Creator:
Jim Andreassen
Date:
7/28/2005
Text:
Well, it happened again! Our MAS course just held at Northwestern University
Prosthetic and Orthotic Center was another huge success. The response
continues to be overwhelming so we have added an additional course to be
held at Cal State University Dominguez Hills located in Aliso Viejo, CA on
January 14-15, 2006. We have held 14 seminars thus far and have
approximately 350 clinicians trained in this new and innovative socket
design. The seminars tend to fill up quickly and attendance is limited, so
if you are interested, please contact us right away.
Two tiers of learning will be offered at the course:
* Tier I - Hands-On - Full two-day seminar, which includes patient
evaluation with casting, modifications, and two test sockets. Attendee must
provide own patient model and his/her travel arrangements
* Tier II - Observation - Full two-day seminar which includes all course
materials, observation of patient evaluation, but no hands-on participation.
There will be 2 observers teamed up with each hands-on attendee.
For those of you not familiar with the M.A.S. socket design, it is a
revolutionary new socket design created and patented by Marlo Ortiz from
Guadalajara, MX.
To read more about the socket design, read a recent article in the O&P Edge
at
<URL Redacted>
rtiz+socket+design
If you would like more information about the course or would like to
register, please contact me via email at <Email Address Redacted> or call
Kelly Weidman at 800-214-6742.
Thank you all.
Jim Andreassen
President, OPGA
Phone: 800-214-6742
Fax: 888-449-0610
email: <Email Address Redacted>
Prosthetic and Orthotic Center was another huge success. The response
continues to be overwhelming so we have added an additional course to be
held at Cal State University Dominguez Hills located in Aliso Viejo, CA on
January 14-15, 2006. We have held 14 seminars thus far and have
approximately 350 clinicians trained in this new and innovative socket
design. The seminars tend to fill up quickly and attendance is limited, so
if you are interested, please contact us right away.
Two tiers of learning will be offered at the course:
* Tier I - Hands-On - Full two-day seminar, which includes patient
evaluation with casting, modifications, and two test sockets. Attendee must
provide own patient model and his/her travel arrangements
* Tier II - Observation - Full two-day seminar which includes all course
materials, observation of patient evaluation, but no hands-on participation.
There will be 2 observers teamed up with each hands-on attendee.
For those of you not familiar with the M.A.S. socket design, it is a
revolutionary new socket design created and patented by Marlo Ortiz from
Guadalajara, MX.
To read more about the socket design, read a recent article in the O&P Edge
at
<URL Redacted>
rtiz+socket+design
If you would like more information about the course or would like to
register, please contact me via email at <Email Address Redacted> or call
Kelly Weidman at 800-214-6742.
Thank you all.
Jim Andreassen
President, OPGA
Phone: 800-214-6742
Fax: 888-449-0610
email: <Email Address Redacted>
Citation
Jim Andreassen, “OPGA ADDS NEW MAS COURSE CSUDH,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 24, 2024, https://library.drfop.org/items/show/225166.
