Ohio O & P Spring Meeting
Dianne Farabi
Description
Collection
Title:
Ohio O & P Spring Meeting
Creator:
Dianne Farabi
Date:
3/11/2005
Text:
Dear List Members,
Once again, The Ohio Chapter of the Academy will host the annual Spring
Meeting In Columbus, Ohio. We will be back at Easton
<URL Redacted> on Saturday, May 7th. At this year's meeting,
we expect to draw approximately 275 attendees from across the USA, and we
boast a large exhibit hall that is representative of the leading
manufacturers and distributors. Historically, this event has been THE
premier event to obtain CEU's, see new products in the exhibit hall, and
discuss trends with your O&P friends.
The morning program highlights a keynote address from Paul Prusakowski, CPO.
As the President Elect of the Academy, Paul will deliver a thought-provoking
address on the future of O&P. This will be followed by a relevant panel on
CAD technology covering prosthetics, orthotics, and pedorthics. The
afternoon breaks out to 4 rooms: prosthetic, orthotic, pedorthic, and
technician. Note the international lecture on the latest techniques for new
glues in the technical room!
Registration forms will be mailed out in about 1 week. If you have any
questions, or you are interested in obtaining a table in the exhibit hall,
please contact Rich Butchko <Email Address Redacted> or (614) 659-0197.
Regards,
Jon Naft, CPO, President, Ohio Chapter
8 - 8:45 Registration and Open Exhibit open
8:45 - 9:00 Opening Remarks, Jonathan Naft, CPO 9:00 - 9:45 Keynote Speaker:
Paul Prusakowski, CPO, President-Elect AAOP The Future of O&P
Practitioner Experiences using CAD for prosthetics, orthotics, and
pedorthics:
9:45 - 10:15 CAD Applications in Prosthetics (Mark Ashford, CPO)
10:15 - 10:45 Break in Exhibit Hall
10:45 - 11: 20 Practitioner Experiences using CAD for Orthotics: Frank
Friddle, CPO
11:25 - 11:45 Practitioner Experiences Using CAD in Pedorthics Steve Brill,
CO
11:45 - 12:00 CAD Panel
12:00 - 1:15 Box lunch in exhibit hall?
1:15 - 5:00 BREAK OUT SESSIONS
PROSTHETIC ROOM
1:15 - 1:45 Socket modification techniques using ETS CAD (Joel Kempfer, CP)
1:45 - 2:15 Socket modification techniques using Omega, Jeff Denune, CP
2:15 - 2:45 Case Studies Utilizing the RHEO Knee , Prosthetist to be
announced
2:45 - 3:00 BREAK
3:00 - 3:40 Suction Socket Design Using Seal In Liner (John Brant, CP) 3:40
- 4:15 New Applications for Carvers using CAD, Larry Lange, CPO
4:15 - 5:00 Case Studdies using the Harmony System, (prosthetist to be
announced)
ORTHOTIC ROOM
1:15 - 1:45 Halo Applications, Larry Lange, CPO
1:45 - 2:15 Gait Analysis Demonstration Using Tek Scan(DR. Bruce Williams)
2:15 - 2:45 Current Trends in Spinal CAD, Frank Friddle, CPO
2:45 - 3:00 BREAK
3:00 - 3:40 DAFO Applications (Rich Gaudio, CO) 3:40 - 4:15 Carbon Fiber
AFO's (Amy Yates, CPO)
4:15 - 5:00 Lecture to be announced
PEDORTHIC ROOM
1:15 - 1:45 Direct Mold Techniques and Material Selection (ACOR) Ross Marty
1:45 - 2:15 Posterior Tibial Tendenitis Management, Dave Deluccia, CPO
2:15 - 2:45 Kathy Kinsey Cast Modifications for Custom FO's session.
2:45 - 3:00 BREAK
3:00 - 3:40 Management Of Charcot (Michael Maierson, CPO) 3:40 - 4:15 CAD
Applications in Pedorthics (Reggie Swickard, CPed)
4:15 - 5:00 Benefits of Biomechanical Control in Athletic Shoes (Speaker to
be announced)
TECHNICIAN ROOM
1:15 - 1:45 New Glue Techniques - the REAL techniques to gluing (Ralph
Burkhardt)
1:45 - 2:15 Frame Lay-up styles and methodology, Vince Inherst, Prosthetic
Tech
2:15 - 2:45 DAFO Fabrication, Eon Osborn, RTO
2:45 - 3:00 BREAK
3:00 - 3:40 Toxins and Safety in the Lab, Scott File, OSHA 3:40 - 4:15
Proper Alignment techniques for knees, Kyle Underwood C.P.
4:15 - 5:00 CROW Walker Fabrication, Aaron Kent CO
Once again, The Ohio Chapter of the Academy will host the annual Spring
Meeting In Columbus, Ohio. We will be back at Easton
<URL Redacted> on Saturday, May 7th. At this year's meeting,
we expect to draw approximately 275 attendees from across the USA, and we
boast a large exhibit hall that is representative of the leading
manufacturers and distributors. Historically, this event has been THE
premier event to obtain CEU's, see new products in the exhibit hall, and
discuss trends with your O&P friends.
The morning program highlights a keynote address from Paul Prusakowski, CPO.
As the President Elect of the Academy, Paul will deliver a thought-provoking
address on the future of O&P. This will be followed by a relevant panel on
CAD technology covering prosthetics, orthotics, and pedorthics. The
afternoon breaks out to 4 rooms: prosthetic, orthotic, pedorthic, and
technician. Note the international lecture on the latest techniques for new
glues in the technical room!
Registration forms will be mailed out in about 1 week. If you have any
questions, or you are interested in obtaining a table in the exhibit hall,
please contact Rich Butchko <Email Address Redacted> or (614) 659-0197.
Regards,
Jon Naft, CPO, President, Ohio Chapter
8 - 8:45 Registration and Open Exhibit open
8:45 - 9:00 Opening Remarks, Jonathan Naft, CPO 9:00 - 9:45 Keynote Speaker:
Paul Prusakowski, CPO, President-Elect AAOP The Future of O&P
Practitioner Experiences using CAD for prosthetics, orthotics, and
pedorthics:
9:45 - 10:15 CAD Applications in Prosthetics (Mark Ashford, CPO)
10:15 - 10:45 Break in Exhibit Hall
10:45 - 11: 20 Practitioner Experiences using CAD for Orthotics: Frank
Friddle, CPO
11:25 - 11:45 Practitioner Experiences Using CAD in Pedorthics Steve Brill,
CO
11:45 - 12:00 CAD Panel
12:00 - 1:15 Box lunch in exhibit hall?
1:15 - 5:00 BREAK OUT SESSIONS
PROSTHETIC ROOM
1:15 - 1:45 Socket modification techniques using ETS CAD (Joel Kempfer, CP)
1:45 - 2:15 Socket modification techniques using Omega, Jeff Denune, CP
2:15 - 2:45 Case Studies Utilizing the RHEO Knee , Prosthetist to be
announced
2:45 - 3:00 BREAK
3:00 - 3:40 Suction Socket Design Using Seal In Liner (John Brant, CP) 3:40
- 4:15 New Applications for Carvers using CAD, Larry Lange, CPO
4:15 - 5:00 Case Studdies using the Harmony System, (prosthetist to be
announced)
ORTHOTIC ROOM
1:15 - 1:45 Halo Applications, Larry Lange, CPO
1:45 - 2:15 Gait Analysis Demonstration Using Tek Scan(DR. Bruce Williams)
2:15 - 2:45 Current Trends in Spinal CAD, Frank Friddle, CPO
2:45 - 3:00 BREAK
3:00 - 3:40 DAFO Applications (Rich Gaudio, CO) 3:40 - 4:15 Carbon Fiber
AFO's (Amy Yates, CPO)
4:15 - 5:00 Lecture to be announced
PEDORTHIC ROOM
1:15 - 1:45 Direct Mold Techniques and Material Selection (ACOR) Ross Marty
1:45 - 2:15 Posterior Tibial Tendenitis Management, Dave Deluccia, CPO
2:15 - 2:45 Kathy Kinsey Cast Modifications for Custom FO's session.
2:45 - 3:00 BREAK
3:00 - 3:40 Management Of Charcot (Michael Maierson, CPO) 3:40 - 4:15 CAD
Applications in Pedorthics (Reggie Swickard, CPed)
4:15 - 5:00 Benefits of Biomechanical Control in Athletic Shoes (Speaker to
be announced)
TECHNICIAN ROOM
1:15 - 1:45 New Glue Techniques - the REAL techniques to gluing (Ralph
Burkhardt)
1:45 - 2:15 Frame Lay-up styles and methodology, Vince Inherst, Prosthetic
Tech
2:15 - 2:45 DAFO Fabrication, Eon Osborn, RTO
2:45 - 3:00 BREAK
3:00 - 3:40 Toxins and Safety in the Lab, Scott File, OSHA 3:40 - 4:15
Proper Alignment techniques for knees, Kyle Underwood C.P.
4:15 - 5:00 CROW Walker Fabrication, Aaron Kent CO
Citation
Dianne Farabi, “Ohio O & P Spring Meeting,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 25, 2024, https://library.drfop.org/items/show/224560.