Re: Technical Question
karl carlson
Description
Collection
Title:
Re: Technical Question
Creator:
karl carlson
Date:
12/16/2000
Text:
hello,
KC here. i have soaked the nylon in Amour All or mink oil before pulling
the poly pro, another alternitive is to pull a PVA bag over the nylon, then
generously perforate. best of luck,
KC Carlson RTP
----- Original Message -----
From: sullyrtpo < <Email Address Redacted> >
To: < <Email Address Redacted> >
Sent: Friday, December 15, 2000 8:35 PM
Subject: [OANDP-L] Technical Question
Hi all, I'm trying to find a solution to a problem I have faced many times.
When pulling a polypropylene frame over a soft, flexible plastic (that cooks
at a lower temperature than polypropylene) What methods do you use to ensure
the nylon does not get heat formed into the soft plastic?
I am familiar with a couple of methods which I would like to improve on.
Any thoughts are welcome.
Sean
KC here. i have soaked the nylon in Amour All or mink oil before pulling
the poly pro, another alternitive is to pull a PVA bag over the nylon, then
generously perforate. best of luck,
KC Carlson RTP
----- Original Message -----
From: sullyrtpo < <Email Address Redacted> >
To: < <Email Address Redacted> >
Sent: Friday, December 15, 2000 8:35 PM
Subject: [OANDP-L] Technical Question
Hi all, I'm trying to find a solution to a problem I have faced many times.
When pulling a polypropylene frame over a soft, flexible plastic (that cooks
at a lower temperature than polypropylene) What methods do you use to ensure
the nylon does not get heat formed into the soft plastic?
I am familiar with a couple of methods which I would like to improve on.
Any thoughts are welcome.
Sean
Citation
karl carlson, “Re: Technical Question,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 28, 2024, https://library.drfop.org/items/show/215573.
