Re: CADCAM CE Course
Dearing, Ruthie
Description
Collection
Title:
Re: CADCAM CE Course
Creator:
Dearing, Ruthie
Date:
4/5/2018
Text:
CADCAM CONTINUING EDUCATION COURSE
Spokane Falls Community College
O& P Technology Program
June 1, 2018
This CE Course is designed for practice owners, business managers, and O&P practitioners seeking information about the purchase of a CADCAM system. The vendors teaching this course include Medico-Supplies, Inc., Ohio Willow Wood, Provel, Standard Cyborg, and Vorum. During the morning session, each vendor will offer an interactive presentation about his/her CADCAM system and allow adequate time for shared communication. In the afternoon, each vendor will provide hands-on demonstrations to small groups of attendees allowing everyone an opportunity to actually try out the product with guidance provided by the vendor representative.
The one (1) day CE course will focus exclusively on turn-key CADCAM systems and has been approved for nine (9) CME credits by the ABC and BOC and for 6 MCE by the OPC (Canada).
REGISTRATION FEES
EARLY REGISTRATION (March 27 thru May 25) $300.00
REGISTRATION AFTER MAY 25 $375.00
REGISTRATION FOR TWO (2) or MORE $250.00 each
(from the same practice)
Registration is limited to only 20 attendees. The course will begin at 7:00 am and end at 5:00 pm with refreshments, lunch, and a parking pass provided. We have a $102 rate at a nearby Holiday Inn that will bring you to and from the College (509) 838-1170.
For further information and a registration form, please contact: Ruthie Dearing (509) 533-3231 <Email Address Redacted> <mailto:<Email Address Redacted>>
Ruthie H. Dearing, MHSA, JD
Program Manager
O & P Technology Program
Spokane Falls Community College
3410 W. Fort George Wright Drive
Spokane, Washington 99224
(509) 533-3231 FAX (509) 533-4143
<Email Address Redacted>
Spokane Falls Community College
O& P Technology Program
June 1, 2018
This CE Course is designed for practice owners, business managers, and O&P practitioners seeking information about the purchase of a CADCAM system. The vendors teaching this course include Medico-Supplies, Inc., Ohio Willow Wood, Provel, Standard Cyborg, and Vorum. During the morning session, each vendor will offer an interactive presentation about his/her CADCAM system and allow adequate time for shared communication. In the afternoon, each vendor will provide hands-on demonstrations to small groups of attendees allowing everyone an opportunity to actually try out the product with guidance provided by the vendor representative.
The one (1) day CE course will focus exclusively on turn-key CADCAM systems and has been approved for nine (9) CME credits by the ABC and BOC and for 6 MCE by the OPC (Canada).
REGISTRATION FEES
EARLY REGISTRATION (March 27 thru May 25) $300.00
REGISTRATION AFTER MAY 25 $375.00
REGISTRATION FOR TWO (2) or MORE $250.00 each
(from the same practice)
Registration is limited to only 20 attendees. The course will begin at 7:00 am and end at 5:00 pm with refreshments, lunch, and a parking pass provided. We have a $102 rate at a nearby Holiday Inn that will bring you to and from the College (509) 838-1170.
For further information and a registration form, please contact: Ruthie Dearing (509) 533-3231 <Email Address Redacted> <mailto:<Email Address Redacted>>
Ruthie H. Dearing, MHSA, JD
Program Manager
O & P Technology Program
Spokane Falls Community College
3410 W. Fort George Wright Drive
Spokane, Washington 99224
(509) 533-3231 FAX (509) 533-4143
<Email Address Redacted>
Citation
Dearing, Ruthie, “Re: CADCAM CE Course,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 25, 2024, https://library.drfop.org/items/show/208855.
