Re: airtight clutch lock

Re: airtight clutch lock

Markus Säufferer

3/11/2021

Hello colleagues and thank you for the helpful responses. I was specifically looking for an airtight clutch lock for this particular application. These are the responses:
Fillauer PM101 titanium body clutch lock with pyramid base - this is airtight as advertised in their catalogue but poorly marketed as such I think
WillowWood Alpha Lock square aluminum base with or without pyramid - WillowWood promotes this and some similar locks as part of their “Interlock” system, where you can switch from suction to locking. This lock has an integrated expulsion valve - YES!
WillowWood also makes a “Lamination Lock” which relies on an 0-ring washer at the top of the pin to make the system airtight
other suggestions were similar to this: just use a small o-ring on the top end of the pin.
Ossur Icelock hybrid lock 562 was also suggested but this is click lock, not clutch.

Thanks again for the helpful insights.

Markus Säufferer, B.Sc.(Kin), CP(c)




P: 250.591.1816 F: 250.591.1914



> On Mar 9, 2021, at 10:37 AM, Markus Säufferer < <Email Address Redacted> > wrote:
>
> Hello Colleagues,
> I am aware of several options (Coyote, Ossur) having airtight / hybrid locks which are based on the shuttle design, which clicks when donned. However, I’m interested in whether there is an all-metal, airtight clutch lock available on the market. I’d appreciate any suggestions.
> Thank you,
> Markus Säufferer, B.Sc.(Kin), CP(c)
>
> <motion_logo_small.jpg>
>
>
> P: 250.591.1816 F: 250.591.1914
>
>
>