Ottobock DVS leg
Josh Parker
Description
Collection
Title:
Ottobock DVS leg
Creator:
Josh Parker
Date:
7/19/2017
Text:
Hey everyone,
I have an established BK amputee that I transitioned from locking coyote lock to DVS vacuum last year. He states that it's the best leg he's had, but I have a problem. It only fits well in the diagnostic socket. I have it as a Bull Ringmaster blister form over the DVS and fiberglass wrap. Every attempt at lamination has resulted in blisters distally or pain. We have attempted different layups of carbon to mimic the (little) flexibility of the plastic.
Has anyone had similar outcomes and any advise for success? Any vacuum compatible 3d print options that can accept DVS internals?
6'0
324lbs
Sent from my Android phone using TouchDown (www.symantec.com)
The information transmitted is the property of Hanger and is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or taking any action in reliance upon, this information by persons or entities other than the intended
recipients is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
I have an established BK amputee that I transitioned from locking coyote lock to DVS vacuum last year. He states that it's the best leg he's had, but I have a problem. It only fits well in the diagnostic socket. I have it as a Bull Ringmaster blister form over the DVS and fiberglass wrap. Every attempt at lamination has resulted in blisters distally or pain. We have attempted different layups of carbon to mimic the (little) flexibility of the plastic.
Has anyone had similar outcomes and any advise for success? Any vacuum compatible 3d print options that can accept DVS internals?
6'0
324lbs
Sent from my Android phone using TouchDown (www.symantec.com)
The information transmitted is the property of Hanger and is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or taking any action in reliance upon, this information by persons or entities other than the intended
recipients is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Citation
Josh Parker, “Ottobock DVS leg,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 22, 2024, https://library.drfop.org/items/show/254840.
