Re: Suggestions for CAD/CAM System.
copc
Description
Collection
Title:
Re: Suggestions for CAD/CAM System.
Creator:
copc
Date:
5/4/2016
Text:
Dear list,
I would also like the same information regarding carvers as we are now in need of a new carver, if you could also include any feedback on the Provel C7 or Medico (Autoform Carver), in addition to the Omega and Vorum.
Thanks,
Keith Senn
Center for Orthotic & Prosthetic Care
-----Original Message-----
From: Orthotics and Prosthetics List [mailto:<Email Address Redacted>] On Behalf Of Zia Rahman
Sent: Tuesday, May 03, 2016 8:38 PM
To: <Email Address Redacted>
Subject: [OANDP-L] Suggestions for CAD/CAM System.
Dear list,
I would appreciate input from any members who is using Omega/VORUM OR any other CAD/CAM System. Please share your overall experience with the system.
Any insight or advice, both positive and negative about the system would be greatly appreciated.
Regards
Zia
BOCPO
P&O SERVICES INC
I would also like the same information regarding carvers as we are now in need of a new carver, if you could also include any feedback on the Provel C7 or Medico (Autoform Carver), in addition to the Omega and Vorum.
Thanks,
Keith Senn
Center for Orthotic & Prosthetic Care
-----Original Message-----
From: Orthotics and Prosthetics List [mailto:<Email Address Redacted>] On Behalf Of Zia Rahman
Sent: Tuesday, May 03, 2016 8:38 PM
To: <Email Address Redacted>
Subject: [OANDP-L] Suggestions for CAD/CAM System.
Dear list,
I would appreciate input from any members who is using Omega/VORUM OR any other CAD/CAM System. Please share your overall experience with the system.
Any insight or advice, both positive and negative about the system would be greatly appreciated.
Regards
Zia
BOCPO
P&O SERVICES INC
Citation
copc, “Re: Suggestions for CAD/CAM System.,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 25, 2024, https://library.drfop.org/items/show/242222.