Responses: component selection for 113Lbs patient

Responses: component selection for 113Lbs patient

Stephan Manucharian

2/5/2013

Thank you all, who responded, your input was very valuable. Below is my
original question followed by the replies I received.


*Dear List,*

*What components would you suggest for the following patient?*

*113 Lbs 21-year old female, transfemoral amputee for 5 years; medium
length well healed residual limb; currently wearing a full suction socket,
mechanical 4-bar knee, s/a foot. Considering her low physical weight, I
would like suggestions of light weight, yet highly functional knee and foot
modules. *

* *

I've used OttoBock 3R60=PRO for with success for these light weight
clients. Also, TiMed makes a nifty 20mm carbon tube and titanium tube clamp
adapter to fit adult sized pyramids. This way you get a light weight pylon
and can use and adult foot like a Trias.



I like the Variflex without the split toe for TF amputees. It's about as
light and active as you will find. And, since she is in a 4-bar already, a
Total Knee 2000. I'm not a fan of the Total Knee, except for previous
wearers.



I had a similiar pt. not to long ago that was 120 lbs and a 26 year old
AK. I fit her with a Freedom MPK and a runway foot. She is having great
results. Hope this helps.



You likely not to find any lighter foot than Dycor.



I have used a total knee (Ossur) along with a trias foot (Otto Bock). I
also fabricate pre-preg sockets which are a fraction of the weight of a
traditional lamination. Let me know if you are interested.



The trias foot from Ottobock is super light and has a lot of motion.



Recently had similar situation and used a child's Total knee and 22 cm sure
flex foot.



You might consider Dycor's definitive foot/ankle/pylon. Combined weight is
approx. one lb. Foot is flexible keel, ankle single or tri-axial, pylon
advanced composite emery storing.



I'm thinking suction socket as she currently has. C-Leg/torsion and Trias
with a 4R57 rotator.
If he doesn't want go with an MPK go with a 3R60 Pro first and a 3R106
second. All the same components otherwise, torsion pylon and 4R57 rotator.


--
*Stephan R. Manucharian, MA, MSc, CP, BOCO, LP(NJ), FAAOP
Clinical Director
Orthopedic Arts Laboratory, Inc.
141 Atlantic Ave., Brooklyn, NY 11201
718-858-2400; Fax: 718-858-9258;
<URL Redacted>

The content of this communication is for exclusive use of the addressee and
may contain confidential, privileged and non-disclosable information. If
the recipient of this communication is not the addressee, such recipient is
strictly prohibited from printing, photocopying, saving on any media,
distributing or otherwise using the information contained herein. If you
received this communication in error, please contact the sender by e-mail,
fax or telephone and destroy this document.
*