Urethane Torsion Rods Results
Joshua Utay
Description
Collection
Title:
Urethane Torsion Rods Results
Creator:
Joshua Utay
Date:
1/17/2011
Text:
Dear List:
Last week, I posted the following inquiry regarding urethane rods for use in
torsion orthoses. I receicved a single, complete resopnse that follows the
original post below.
--Joshua B. Utay, CPO
Dear List,
We are looking for the 3/8 diameter vertical rods to fit torsion orthoses
(HKAFO's) originally sold by IPOS. They referred to the material as
Vulkolan, a homogeneous elastomer, that looks like amber urethane and can
darken with age.
Any information on where we can get this material would be extremely helpful
and will be posted afterwords. Thank you.
Reply:
>> McMaster-Carr sells polyurethane rods that will fit directly into the
Becker joints. You can get them in various durometers, but if you are
swapping urethane for cables to save weight, you probably want a shore 75D,
or the hardest you can get. Search their web-stie under Polyurethane /
Rods, then select your length, dia, durometer. They come both in amber and
in black. Hope this helps.
--
Michael S. Johnson, CPO
Twin Falls, ID <<
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Last week, I posted the following inquiry regarding urethane rods for use in
torsion orthoses. I receicved a single, complete resopnse that follows the
original post below.
--Joshua B. Utay, CPO
Dear List,
We are looking for the 3/8 diameter vertical rods to fit torsion orthoses
(HKAFO's) originally sold by IPOS. They referred to the material as
Vulkolan, a homogeneous elastomer, that looks like amber urethane and can
darken with age.
Any information on where we can get this material would be extremely helpful
and will be posted afterwords. Thank you.
Reply:
>> McMaster-Carr sells polyurethane rods that will fit directly into the
Becker joints. You can get them in various durometers, but if you are
swapping urethane for cables to save weight, you probably want a shore 75D,
or the hardest you can get. Search their web-stie under Polyurethane /
Rods, then select your length, dia, durometer. They come both in amber and
in black. Hope this helps.
--
Michael S. Johnson, CPO
Twin Falls, ID <<
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Citation
Joshua Utay, “Urethane Torsion Rods Results,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 1, 2024, https://library.drfop.org/items/show/232256.