Face Mask for Sports

Face Mask for Sports

Eddy Leopoldo Fuentes, CPO

8/17/2010

Hi to all:

 

Thanks to everyone who took the time to respond and for their valuable input
to my request regarding the face mask for sports. Special thanks to Ted
Trower, CPO, FAAOPT and John Schulte, CPO, FAAOP who were able to share
power points presentations on the subject.

Seem like the materials mostly used are: VIVAK PET G, DURR PLEX, UVEX,
SURLYN,

 

Here is original post following by the replies.

 

 

Hi to all:

 

I am looking assistance regarding the appropriate materials and designs for
sports face mask. If anyone can share a power point on the subject that will
be greatly appreciated.

 

 

 

 

 

Replies:

 

 

· I used UVex in the beginning, but switched to O&P transparent
plastics later on. Usually used Durplex or Surlyn. Remember total contact
but relief over the fracture site. If you can stay off of the mandible you
will have less problem with it shifting. Elastic Velcro Straps are the
easiest if you have them. Above and below the ears and one on top. Have
them intersect just above the occipital area. If this is for sports and not
a burn you do not need the detail of an alginate impression. If you need
more specific help, get back to me. Terry

 

· I have made them for all types of sports teams professional and
scholastic. Here is a program that I have made up. Yours to use if you
wish.... Good Luck, John

 

· Looking to get in contact with Troy Fink, CPO, Thanks. Mike

 

· We had been using a 3/16 Vivak. I had learned from Gary McHale,
who is the orthotist who fabricated Rip Hamilton's mask. Last I heard he may
have retired, but you can try contacting him. He was plaster molding the
faces still. I am currently using a laser scanner and fabricating from a
company in FL called Merimed...they are also the Bioscanner people. Good
Luck, Sean

 

· I do not have a PP but have made them frequently. I take a mold of
the face using either: Plaster of Paris, DuPont RTV 3100 Silicone or
Alginate Impression Material I fill the mold and make appropriate
modifications. I add thermo-foam pads in key areas to protect the necessary
structures and provide shock absorption. (Can be done after molding as well)
I mold the mask from 3-5mm Dura Plex (old Flexilene). This is a flexible and
shock absorbent material. If you want a more rigid material use Surlyn. Good
luck. Jim

 

· I usually use 3/16 (durr plex, vivak, pet-G all the same thing
just different names). If anyone gives you different materials I would like
to know what they recommend. Jim

· We used alginate and smeared it on the face lightly. I then
splinted it with plaster to reinforce. We also used fuzzy velcro to get it
to stick. Just avoid the nostrils if you can. We used surlyn or durr-flex
for the plastic, but there are others. Most of the time a half-mask is
adequate to provide support for the bridge of the nose. Hope that helps,
Gerry

 

· PET Item#: 111P18/2mm Or in PET Item#: 111P18/3mm Suitable for
deep drawing, recommended for facial masks after burn injuries or facial
fractures Highly break-proof, n evident shrinking, skin-safe, can be
sterilized-moldable @ 140 degrees Celsius. Let me know if you need
additional info. Stephanie






 

 

 

 

Eddy Leopoldo Fuentes, C.P.O.

ORTOPEDIA CENTROAMERICANA - GUATEMALA

Certified by The American Board for Certification in Orthotics and
Prosthetics-ABC

Active member of the American Academy of Orthotists and Prosthetists-AAOP

 

 <mailto:<Email Address Redacted>>
<Email Address Redacted>

 

 < <URL Redacted>> www.ortopediacentroamericana.com

 

Office phone: Country Code (502) 2434-5243

Cel: (502) 5966-2195

 

CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may
contain confidential and privileged information for the use of the
designated recipients. If you are not the intended recipient, (or authorized
to receive for the recipient) you are hereby notified that you have received
this communication in error and that any review, disclosure, dissemination,
distribution or copying of it or its contents is prohibited. If you have
received this communication in error, please destroy all copies of this
communication and any attachments and contact the sender by reply e-mail or
telephone: Country Code (502) 2434-5243.

 

NOTIFICACION DE CONFIDENCIALIDAD: Este correo electrónico y sus documentos
adjuntos pueden contener información confidencial y privilegiada para el uso
exclusivo de la o las personas a quien va dirigido. Si usted no es la
persona a quien va dirigido (o con autorización para recibir este mensaje)
por la presente se le notifica que usted ha recibido este mensaje por error
y que cualquier revisión, distribución, diseminación, o reproducción de su o
sus contenidos esta prohibido. Si usted ha recibido este mensaje por error,
por favor destruya todas las copias de este mensaje y sus documentos
adjuntos y contacte al que lo envía por medio de correo electrónico o por
teléfono: Codigo del Pais (502) 2434-5243

 


                          ********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.

If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>

OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.

Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.