beveling edge of an alpha liner

Pat Peick

Description

Title:

beveling edge of an alpha liner

Creator:

Pat Peick

Date:

3/10/2010

Text:

Dear List,
Does anyone know a technique to bevel the edge of a 9mm thick alpha?
Over the width of 1/2, other alpha was smoothed from original thickness
to not much more than the thickness of fabric on the cut trimline.

Pat Peick, C.P.O.
603-228-1466
603-224-6031(fax)
 
<Email Address Redacted>
www.nebrace.com
 

This e-mail, including attachments, is covered by the Electronic
Communications Privacy Act, 18 USC 2510-2521, & the HIPAA regulations
and, as such, is confidential & may be legally privileged. It is
intended for the use of the individual or entity to which it is
addressed & may contain certain information that is privileged,
confidential & exempt from disclosure under applicable law. If the
reader of this message is not the intended recipient or agent
responsible for delivering or copying this communication & attachments,
you are hereby notified that any retention, dissemination, distribution
or copying of any of the contents are strictly prohibited. If you have
received this communication in error, please reply to the sender & then
delete it. Thank you for your cooperation.

 

                          ********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.

If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>

OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.

Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.

Citation

Pat Peick, “beveling edge of an alpha liner,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 24, 2024, https://library.drfop.org/items/show/231231.