Re: 500+ lbs bk components RESPONSES
Pat Peick
Description
Collection
Title:
Re: 500+ lbs bk components RESPONSES
Creator:
Pat Peick
Date:
10/29/2009
Text:
Thank you LIST for the quick responses, most appreciated. See them below
Original Post
>> Does anyone have a preferred manufacturer of pylon system and foot
for a
500 lbs male, 76in tall?<<
Responses:
Pat, I cannot say I have a preferred manufacturer but....try american
Prosthetic componentry in Green Bay Wisconsin. They phoned me today and
are offering additional discounts throughout the week
TiMed does the endo components with Freedom or Kingsley doing the feet.
These endo components are not standard size so they are not
interchangeable.
Call freedom innovations 949 672 0032
Pat, try Fillauer, they have an excellent HD system.
TiMed
Otto Bock will make one special for you, contact your rep to the
correct
person to talk to out in SLC.
Bulldog
We have a systems that is rated for 420 lbs. I realize your patient is
500, but maybe it would be adequate for you uses. It is of a Carbon
pylon and Titanium tube clamps and a oversize 4 prong adapter. I think
Kingsley has a foot but it only goes up to 450lbs I believe.
Pat Peick, C.P.O.
603-228-1466
603-224-6031(fax)
<Email Address Redacted>
www.nebrace.com
This e-mail, including attachments, is covered by the Electronic
Communications Privacy Act, 18 USC 2510-2521, & the HIPAA regulations
and, as such, is confidential & may be legally privileged. It is
intended for the use of the individual or entity to which it is
addressed & may contain certain information that is privileged,
confidential & exempt from disclosure under applicable law. If the
reader of this message is not the intended recipient or agent
responsible for delivering or copying this communication & attachments,
you are hereby notified that any retention, dissemination, distribution
or copying of any of the contents are strictly prohibited. If you have
received this communication in error, please reply to the sender & then
delete it. Thank you for your cooperation.
Original Post
>> Does anyone have a preferred manufacturer of pylon system and foot
for a
500 lbs male, 76in tall?<<
Responses:
Pat, I cannot say I have a preferred manufacturer but....try american
Prosthetic componentry in Green Bay Wisconsin. They phoned me today and
are offering additional discounts throughout the week
TiMed does the endo components with Freedom or Kingsley doing the feet.
These endo components are not standard size so they are not
interchangeable.
Call freedom innovations 949 672 0032
Pat, try Fillauer, they have an excellent HD system.
TiMed
Otto Bock will make one special for you, contact your rep to the
correct
person to talk to out in SLC.
Bulldog
We have a systems that is rated for 420 lbs. I realize your patient is
500, but maybe it would be adequate for you uses. It is of a Carbon
pylon and Titanium tube clamps and a oversize 4 prong adapter. I think
Kingsley has a foot but it only goes up to 450lbs I believe.
Pat Peick, C.P.O.
603-228-1466
603-224-6031(fax)
<Email Address Redacted>
www.nebrace.com
This e-mail, including attachments, is covered by the Electronic
Communications Privacy Act, 18 USC 2510-2521, & the HIPAA regulations
and, as such, is confidential & may be legally privileged. It is
intended for the use of the individual or entity to which it is
addressed & may contain certain information that is privileged,
confidential & exempt from disclosure under applicable law. If the
reader of this message is not the intended recipient or agent
responsible for delivering or copying this communication & attachments,
you are hereby notified that any retention, dissemination, distribution
or copying of any of the contents are strictly prohibited. If you have
received this communication in error, please reply to the sender & then
delete it. Thank you for your cooperation.
Citation
Pat Peick, “Re: 500+ lbs bk components RESPONSES,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 25, 2024, https://library.drfop.org/items/show/230786.