POLISHING CONE
Ralph Nobbe
Description
Collection
Title:
POLISHING CONE
Creator:
Ralph Nobbe
Date:
9/4/2007
Text:
Need assistance locating a polishing/grinding tool.
We have used a polishing cone that we are trying to locate a source for. It
is used for polishing acrylic, epoxy, graphite laminates and works extremely
well.
It is similar to the tyco cones but is gray and measures 1.5 inches in
diameter and 3 inches in length. It is painted pink on the end to identify
it for laminate use and has a hole for threaded shaft use on long shaft
carvers such as Trautmen, etc. It also works extremely well when used in a
variable speed drill press at low RPM.
The name DuraPol is printed on the end.
This particular cone works better than anything we have found for polishing
the edges of laminates. When I ordered them originally, I ordered a bunch,
now we are running out and cannot locate a source. Have tried all normal
supplier sources.
Any suggestions?
Ralph W. Nobbe, CPO
Nobbe Orthopedics, Inc.
3010 State Street
Santa Barbara, CA 93105
(805) 687-7508 tel
(805) 687-6251 fax
< <URL Redacted>> www.nobbeorthopedics.com
CONFIDENTIALITY NOTE:
This e-mail and any attachments are confidential and may be protected
by legal privilege. If you are not the intended recipient, be aware
that any disclosure, copying, distribution or use of this e-mail or any
attachment is prohibited. If you have received this e-mail in error,
please notify us immediately by returning it to the sender and delete
this copy from your system. Thank you for your cooperation.
We have used a polishing cone that we are trying to locate a source for. It
is used for polishing acrylic, epoxy, graphite laminates and works extremely
well.
It is similar to the tyco cones but is gray and measures 1.5 inches in
diameter and 3 inches in length. It is painted pink on the end to identify
it for laminate use and has a hole for threaded shaft use on long shaft
carvers such as Trautmen, etc. It also works extremely well when used in a
variable speed drill press at low RPM.
The name DuraPol is printed on the end.
This particular cone works better than anything we have found for polishing
the edges of laminates. When I ordered them originally, I ordered a bunch,
now we are running out and cannot locate a source. Have tried all normal
supplier sources.
Any suggestions?
Ralph W. Nobbe, CPO
Nobbe Orthopedics, Inc.
3010 State Street
Santa Barbara, CA 93105
(805) 687-7508 tel
(805) 687-6251 fax
< <URL Redacted>> www.nobbeorthopedics.com
CONFIDENTIALITY NOTE:
This e-mail and any attachments are confidential and may be protected
by legal privilege. If you are not the intended recipient, be aware
that any disclosure, copying, distribution or use of this e-mail or any
attachment is prohibited. If you have received this e-mail in error,
please notify us immediately by returning it to the sender and delete
this copy from your system. Thank you for your cooperation.
Citation
Ralph Nobbe, “POLISHING CONE,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 1, 2024, https://library.drfop.org/items/show/228602.