need rigid foam source
Ralph Nobbe
Description
Collection
Title:
need rigid foam source
Creator:
Ralph Nobbe
Date:
9/1/2005
Text:
Need a source for rigid two part foam similar to Kingsley and Otto Bock but
a lower density that is easier to modify/sand/etc. We used to purchase some
that was marketed to OandP for use in TLSO molds - sold be the case of
gallon jugs. Any one know the source? Thanks in advance.
Ralph W. Nobbe, CPO
Nobbe Orthopedics, Inc.
(805) 687-7508
< <URL Redacted>> www.nobbeorthopedics.com
CONFIDENTIALITY NOTE:
This e-mail and any attachments are confidential and may be protected
by legal privilege. If you are not the intended recipient, be aware
that any disclosure, copying, distribution or use of this e-mail or any
attachment is prohibited. If you have received this e-mail in error,
please notify us immediately by returning it to the sender and delete
this copy from your system. Thank you for your cooperation.
a lower density that is easier to modify/sand/etc. We used to purchase some
that was marketed to OandP for use in TLSO molds - sold be the case of
gallon jugs. Any one know the source? Thanks in advance.
Ralph W. Nobbe, CPO
Nobbe Orthopedics, Inc.
(805) 687-7508
< <URL Redacted>> www.nobbeorthopedics.com
CONFIDENTIALITY NOTE:
This e-mail and any attachments are confidential and may be protected
by legal privilege. If you are not the intended recipient, be aware
that any disclosure, copying, distribution or use of this e-mail or any
attachment is prohibited. If you have received this e-mail in error,
please notify us immediately by returning it to the sender and delete
this copy from your system. Thank you for your cooperation.
Citation
Ralph Nobbe, “need rigid foam source,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 5, 2024, https://library.drfop.org/items/show/225438.