suction valve for thermoplastic socket

Skewes, Ed

Description

Title:

suction valve for thermoplastic socket

Creator:

Skewes, Ed

Date:

8/6/2004

Text:

Good Afternoon,
  Several years ago the hypobaric sock was introduced. In addition was a
small expulsion valve with a white plastic screw with a hole in it, and a
black plastic valve body with a small O ring.
  This valve could be placed into a thermoplastic socket by drilling a 1/4
hole and then screwing the two pieces together. Do you know if this is still
available and where it can be purchased?
  Thank you,
    Ed Skewes CPO
CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may
contain confidential and privileged information for the use of the
designated recipients. If you are not the intended recipient, (or
authorized to receive for the recipient) you are hereby notified that you
have received this communication in error and that any review, disclosure,
dissemination, distribution or copying of it or its contents is prohibited.
If you have received this communication in error, please destroy all copies
of this communication and any attachments and contact the sender by reply
e-mail or telephone (813) 281-0300.

                          ********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.

If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>

OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.

Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.

Citation

Skewes, Ed, “suction valve for thermoplastic socket,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 26, 2024, https://library.drfop.org/items/show/223566.