Heating plastic in oven RESPONSES
Randy McFarland
Description
Collection
Title:
Heating plastic in oven RESPONSES
Creator:
Randy McFarland
Date:
4/18/2003
Text:
Original Question:
Hi List members-
After first doing a search on ovens on OandP.com, I have this
question:
With our convection Endolite and our Dri Clime infrared ovens, we
have to rotate our thicker plastics to assure even heating for an even
thickness pull. Is this necessary for all ovens, for instance, on
blister-forming 5/8 plastic? Thanks, Randy McFarland, CPO Sunny Hills
Orthopedic Services
RESPONSES- thanks to those who contributed- each is separated by a blank
line
We blister form about 300 pieces a month and we have to rotate all our
thicker plastics. We use a convection Grieve(sp) oven. Bob
There is a good chance that the plastic you are using is not pure. We
have had experiences with recycled or contaminated plastic that heats
unevenly. Try a different distributor and make them comp you a piece of
each type. Tell them you are shopping around and they are more than
willing to help. Believe me, good plastic translates into more uniform
pulls. As far as ovens are concerned, we use an old bakery convection
for our blister forming and don't rotate plastic at all.
Hope this helps, Michael Pack, C.P.Artificial Limb Specialists
Phoenix
We have gas and infrared (PDQ) When we blister mold we have to rotate
the plastic with both types. When plastic is placed on a sheet for drape
molding we do not have to rotate.
Mike Martin C.O.
When pulling 1/2 polypro in a blister we flip twice.
Ted A. Trower C.P.O. A-S-C Orthotics & Prosthetics Jackson, MI,
www.amputee.com
I use a Blodgett convection oven. Its intended use was for baking but
the more i researched things at the time, the more i found i was paying
through the nose if I purchased an O&P type oven. I use it mostly for
bubble forming 1/2 plastic and found by using a deflection shield I no
longer had to rotate the plastic. I formed a thin gauge piece of sheet
metal to route the air flow to the sides of the oven instead of directly
onto the heating plastic. Currently I'm using vivek and proflex
w/silicon. Luke Richards BOC OP
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Hi List members-
After first doing a search on ovens on OandP.com, I have this
question:
With our convection Endolite and our Dri Clime infrared ovens, we
have to rotate our thicker plastics to assure even heating for an even
thickness pull. Is this necessary for all ovens, for instance, on
blister-forming 5/8 plastic? Thanks, Randy McFarland, CPO Sunny Hills
Orthopedic Services
RESPONSES- thanks to those who contributed- each is separated by a blank
line
We blister form about 300 pieces a month and we have to rotate all our
thicker plastics. We use a convection Grieve(sp) oven. Bob
There is a good chance that the plastic you are using is not pure. We
have had experiences with recycled or contaminated plastic that heats
unevenly. Try a different distributor and make them comp you a piece of
each type. Tell them you are shopping around and they are more than
willing to help. Believe me, good plastic translates into more uniform
pulls. As far as ovens are concerned, we use an old bakery convection
for our blister forming and don't rotate plastic at all.
Hope this helps, Michael Pack, C.P.Artificial Limb Specialists
Phoenix
We have gas and infrared (PDQ) When we blister mold we have to rotate
the plastic with both types. When plastic is placed on a sheet for drape
molding we do not have to rotate.
Mike Martin C.O.
When pulling 1/2 polypro in a blister we flip twice.
Ted A. Trower C.P.O. A-S-C Orthotics & Prosthetics Jackson, MI,
www.amputee.com
I use a Blodgett convection oven. Its intended use was for baking but
the more i researched things at the time, the more i found i was paying
through the nose if I purchased an O&P type oven. I use it mostly for
bubble forming 1/2 plastic and found by using a deflection shield I no
longer had to rotate the plastic. I formed a thin gauge piece of sheet
metal to route the air flow to the sides of the oven instead of directly
onto the heating plastic. Currently I'm using vivek and proflex
w/silicon. Luke Richards BOC OP
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affiliations should be used in all communications.
Citation
Randy McFarland, “Heating plastic in oven RESPONSES,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 28, 2024, https://library.drfop.org/items/show/220984.
