Re: Knee Unit Responses
Janette Morris
Description
Collection
Title:
Re: Knee Unit Responses
Creator:
Janette Morris
Date:
3/5/2002
Text:
Original query:
>I have a 53 yo, 5'4, 225lb female patient with a
long
>AK amputation. I would like to use a
>4-bar/polycentric knee to accommodate her long
>residual limb, preferably hydraulic or pneumatic.
Any
>ideas on a knee appropriate for her body weight, but
>as lightweight as possible?
>She has good strength and stability, moderate
activity
>level.
>Thank you for assistance.
Thanks for the rapid response. These are the
suggestions so far:
I ever seen the knee joint in the Ottobock website.
You can see in the
WWW.ottobock.com
_______________
Endolite has selections in the high activ range that
may work.one that
comes
to mind is the hi act hydraulic with CaTech short SnS
installed,if you
have
room and are comf with Endolite full alignment system
(mim room needed
knee
to socket).Its not four bar but is SnS. also Daw has a
knee ,don't know
name
that uses very short basket/plate attachment
_____________________________
How about a Black Max Short hydraulic?
___________________________
For my larger transfemoral patients I use the Total
Knee High Activity.
It
has a very stable stance phase and with the
appropriate choice of feet
you
can essentially dictate where and when the knee breaks
for swing phase.
__________________________
Jannette, I do not have an Otto Bock catalogue in
front of me at the
moment,
but, they manufacture a Knee disarticulation Four bar
linkage knee with
mini
hydraulic unit control. They are tricky to align since
they do not
offer
ab/adduction adjustability proximal to the knee.
I have used several in the past without incident. They
also have a low
resistance version available that is not listed, you
have to request
the tech
center do a transfer before shipment. Good luck!!!!
_________________________________
Janette check with Otto Bock they have several
polycentric knees that will be good for this patient
____________________________
DAW makes a HD 5 bar (250lbs) Total knee HD 275lbs
______________________________
I have had excellent results with using the Proteor
knees sold by DAW
as
Geri-Lite. This is not designed as a geriatric
system, only sold as
such
by DAW in the USA. I prefer the stability 1 knee.
_______________________________________________
Total Knee work well. You might want to try the
largest size.
__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
<URL Redacted>
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affilliations should be used in all communications.
>I have a 53 yo, 5'4, 225lb female patient with a
long
>AK amputation. I would like to use a
>4-bar/polycentric knee to accommodate her long
>residual limb, preferably hydraulic or pneumatic.
Any
>ideas on a knee appropriate for her body weight, but
>as lightweight as possible?
>She has good strength and stability, moderate
activity
>level.
>Thank you for assistance.
Thanks for the rapid response. These are the
suggestions so far:
I ever seen the knee joint in the Ottobock website.
You can see in the
WWW.ottobock.com
_______________
Endolite has selections in the high activ range that
may work.one that
comes
to mind is the hi act hydraulic with CaTech short SnS
installed,if you
have
room and are comf with Endolite full alignment system
(mim room needed
knee
to socket).Its not four bar but is SnS. also Daw has a
knee ,don't know
name
that uses very short basket/plate attachment
_____________________________
How about a Black Max Short hydraulic?
___________________________
For my larger transfemoral patients I use the Total
Knee High Activity.
It
has a very stable stance phase and with the
appropriate choice of feet
you
can essentially dictate where and when the knee breaks
for swing phase.
__________________________
Jannette, I do not have an Otto Bock catalogue in
front of me at the
moment,
but, they manufacture a Knee disarticulation Four bar
linkage knee with
mini
hydraulic unit control. They are tricky to align since
they do not
offer
ab/adduction adjustability proximal to the knee.
I have used several in the past without incident. They
also have a low
resistance version available that is not listed, you
have to request
the tech
center do a transfer before shipment. Good luck!!!!
_________________________________
Janette check with Otto Bock they have several
polycentric knees that will be good for this patient
____________________________
DAW makes a HD 5 bar (250lbs) Total knee HD 275lbs
______________________________
I have had excellent results with using the Proteor
knees sold by DAW
as
Geri-Lite. This is not designed as a geriatric
system, only sold as
such
by DAW in the USA. I prefer the stability 1 knee.
_______________________________________________
Total Knee work well. You might want to try the
largest size.
__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
<URL Redacted>
********************
To unsubscribe, send a message to: <Email Address Redacted> with
the words UNSUB OANDP-L in the body of the
message.
If you have a problem unsubscribing,or have other
questions, send e-mail to the moderator
Paul E. Prusakowski,CPO at <Email Address Redacted>
OANDP-L is a forum for the discussion of topics
related to Orthotics and Prosthetics.
Public commercial postings are forbidden. Responses to inquiries
should not be sent to the entire oandp-l list. Professional credentials
or affilliations should be used in all communications.
Citation
Janette Morris, “Re: Knee Unit Responses,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 28, 2024, https://library.drfop.org/items/show/218586.