RESPONSES: AFO Fabication Question, PART ONE
Paul Rieth
Description
Collection
Title:
RESPONSES: AFO Fabication Question, PART ONE
Creator:
Paul Rieth
Date:
10/9/2001
Text:
THIS IS PART ONE OF A TWO PART POSTING.
Thanks very much to all that replied. The responses were overwhelming and very helpful. Below is the initial inquiry followed by the responses:
Problem: Pulling thermoplastics over an AFO lined with aliplast or
> plastizote causes the plastic to curl in, regardless of how long it is
> left on the model. I end up using a blow torch to reheat the plastic and
> torque it back out into proper alignment. There has got to be a better
> way. I would appreciate any suggestions.
Thanks very much to all that replied. The responses were overwhelming and very helpful. Below is the initial inquiry followed by the responses:
Problem: Pulling thermoplastics over an AFO lined with aliplast or
> plastizote causes the plastic to curl in, regardless of how long it is
> left on the model. I end up using a blow torch to reheat the plastic and
> torque it back out into proper alignment. There has got to be a better
> way. I would appreciate any suggestions.
Citation
Paul Rieth, “RESPONSES: AFO Fabication Question, PART ONE,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 8, 2024, https://library.drfop.org/items/show/217597.