Re: socket configuration
Description
Collection
Title:
Re: socket configuration
Text:
John,
Problems associated with this could be socket design, but it also could be
associated with residual limb length, amount of redundant tissue, or
interfaces used between the limb and socket. Instead of posting this problem
on the Listserv, your best bet is to speak directly with your Certified
Prosthetist about this. It gives him or her the chance to correct the
problem if it can be.
Paul Rieth, CPO
I have very recently received my 1st below the knee prosthesis. The socket is
high behind the knee and only allows my knee to bend +/- 80 degrees making
stair negotiations very dificult, in addition, the socket's front top extends
about half way up my knee. Both these conditions seem to make using the limb
clumsy and uncomfortable.
Please let me know if these are normalconditions for a socket. Thank you.
John Keppler
<Email Address Redacted>
Problems associated with this could be socket design, but it also could be
associated with residual limb length, amount of redundant tissue, or
interfaces used between the limb and socket. Instead of posting this problem
on the Listserv, your best bet is to speak directly with your Certified
Prosthetist about this. It gives him or her the chance to correct the
problem if it can be.
Paul Rieth, CPO
I have very recently received my 1st below the knee prosthesis. The socket is
high behind the knee and only allows my knee to bend +/- 80 degrees making
stair negotiations very dificult, in addition, the socket's front top extends
about half way up my knee. Both these conditions seem to make using the limb
clumsy and uncomfortable.
Please let me know if these are normalconditions for a socket. Thank you.
John Keppler
<Email Address Redacted>
Citation
“Re: socket configuration,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 25, 2024, https://library.drfop.org/items/show/213323.
