Prosthetic problem
Wyn Lewis
Description
Collection
Title:
Prosthetic problem
Creator:
Wyn Lewis
Date:
10/28/1999
Text:
Possibe solution to allow increased Knee flexion.
I'm a trans tibial amputee and a qualified Prosthetist/Orthotist. With
refrence to you're problem of knee flexion. In my spare time I climb and
use a rowing machine in the gym of which both activities require
repeated and full flexion at the knee. Over the years what I have found
that works for me is Iceross suspension with an Ossur Varilock K-175400.
When making the socket I found the width of the posterior opening to be
crucial rather than lowering the height of the posterior shelf. When the
knee is fully flexed it can draw on the end of the residual limb this
can be aliviated by reliesing the lock just enough to stop the drawiung
effect. Another alternative to the lock is the lanyard K-391000 this
might be better as it is infinately adjustable and the leg will not fall
off if the release button is pushed. All my sockets have been cast using
the Otto Bock Dynamic method, the proximal trim lines are kept low
however they do brovide a minimum amount of suspension.
Finally Years ago I saw someone with a similar problem who rode a
motorbike, his prosthesis had a posterior section which he could move
out of the way when he required to ride the bike.
Hope this information will provide you with a solution.
Wyn
I'm a trans tibial amputee and a qualified Prosthetist/Orthotist. With
refrence to you're problem of knee flexion. In my spare time I climb and
use a rowing machine in the gym of which both activities require
repeated and full flexion at the knee. Over the years what I have found
that works for me is Iceross suspension with an Ossur Varilock K-175400.
When making the socket I found the width of the posterior opening to be
crucial rather than lowering the height of the posterior shelf. When the
knee is fully flexed it can draw on the end of the residual limb this
can be aliviated by reliesing the lock just enough to stop the drawiung
effect. Another alternative to the lock is the lanyard K-391000 this
might be better as it is infinately adjustable and the leg will not fall
off if the release button is pushed. All my sockets have been cast using
the Otto Bock Dynamic method, the proximal trim lines are kept low
however they do brovide a minimum amount of suspension.
Finally Years ago I saw someone with a similar problem who rode a
motorbike, his prosthesis had a posterior section which he could move
out of the way when he required to ride the bike.
Hope this information will provide you with a solution.
Wyn
Citation
Wyn Lewis, “Prosthetic problem,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 16, 2024, https://library.drfop.org/items/show/212949.
