Results of Computer Software

Description

Title:

Results of Computer Software

Text:

Hi everyone,
        Just want to inform you that once we try a few of these out, we would
get back with everyone on our decision and why—Thanks for all the help.

Gordon

RESULTS:
Dear Gordon,
You might try Medical Office Software, Inc. for the MOM & POP program, (888)
667-9273, out of Davie, FL..You might also want to check out O.P.S. Software
by Futura International, Inc., (813) 791-3332. We are in the process of
upgrading our computer systems at the office and are going to get one of
these systems to assist the secretarial staff and help in our coding, so we
don't miss anything!
Call either of the above mentioned software suppliers and they will send you
the information packets.
Good luck rooting thru it all, we still are.
Steve Dickerson, C.P.

*****
Try <Email Address Redacted>
******
Who ever you use, try to get a committment in writing as to the amount of
training and support you'll get. See if you can get them to agree to a return
visit or two when you need them.
   Good luck!

Randy McFarland, CPO
*******
Gordon, Orthomedics distributes Med Flex (out of Indianapolis)
Good Luck>
                    JD.
*******
MedFlex is an O&P designed and driven software package that has been in the
O&P field for the last ten years.

Additionally, we have converted many Mom&Pop users. If you would like more
information, please visit our website at www.orthomerica.com. Click on the
What's New section for more information on MedFlex.
<A HREF= <URL Redacted>>
</A>
If you have any questions, please feel free to call Kathy at 800.446.6770.

Regards,

Bill Gustavson
********
Have you heard of Medflex? You can contact them at 800-824-7406. I am sure
that they will be glad to send you some info. on there software.
Good Luck,
Eddie
******
Try Med Flex with Orthoamerica

I have it and love it

Scott Sabolich C.P.
Scott Sabolich Prosthetic & Research Center
Oklahoma City, OK 73114
*****
<< Gordon,
We have been using Medical Office Management software since 1994. Yes, it was
originally offered by SPS, now the company's name is MEDICAL OFFICE SOFTWARE,
INC. 2280 S.W. 70 Avenue, Suite 9, Davie, FLA. 33317 Voice:
888-667-9273 FAX 954- 476-5616 email: MOM& <Email Address Redacted> Hope
this helps.
Regards,
David F. Moretto, CP, FAAOP
Director
Prosthetic Orthotic Center
Helen Hayes Hospital
Route 9W
West Haverstraw, N.Y. 10993
(914) 786-4122
*******
A few years ago, I spoke with Becker about their software. I spoke with a
couple of O&P firms that used it and was told it was very good. I don't
know, though, if they've kept up with technology or are still maintaining
the software. They had contracted with a software firm to create the
software. If you contact Becker, they will direct you to the firm.

Harold Anderson, CO
*****
We use MediSoft software. While it is not particularly written for P&O, it
is fully capable of doing the job and we have been using it for four years.
It also has a scheduling system that can be purchased. The good news is
that there are about 100,000 users of the package (not likely to disappear
soon) and the cost for a multi-user networking version, including the
scheduler is about 1,200.00 to 1,300.00 dollars. The single user package is
about $495.00, I think. The yearly maintenance fee is about $200.00, I
believe. Any way you look at it, I doubt that you will find a package that
is more powerful and adequate for a P&O practice for that kind of money.
The company offers seminars all around the country on an on-going basis and
the seminars are $200.00, or there about for a two day course, not counting
hotel, etc. They are located in Phoenix, Arizona. You can also download a
fully working demo version from their website. It expires is about 30 days,
but you download it again, if you need more time for examination. From an
accounting sense, we use Peachtree Accounting for our purchase orders,
accounts payable, general ledger, etc. It is a great package that sells for
about $149.00, or so. At the end of each month, we transfer Medisoft data
into the general ledger. It works slick and is virtually painless. You are
welcome to visit us and see it in action. We have a small office, but I
would use if for a large company without hesitation. When I was President
of LaForsch, in Dayton, Ohio, we used MedFlex. It is a nice package, but
very expensive, and not really necessary unless you are one of those who
likes to print out report after report to analyze your business. You can
also analyze your business with MediSoft, LCode by LCode, etc., etc. The
Peachtree general ledger and the available reports from MediSoft are all you
really need. Hope this helps.

Wil Haines, CPO
*****
We use MediSoft software. While it is not particularly written for P&O, it
is fully capable of doing the job and we have been using it for four years.
It also has a scheduling system that can be purchased. The good news is
that there are about 100,000 users of the package (not likely to disappear
soon) and the cost for a multi-user networking version, including the
scheduler is about 1,200.00 to 1,300.00 dollars. The single user package is
about $495.00, I think. The yearly maintenance fee is about $200.00, I
believe. Any way you look at it, I doubt that you will find a package that
is more powerful and adequate for a P&O practice for that kind of money.
The company offers seminars all around the country on an on-going basis and
the seminars are $200.00, or there about for a two day course, not counting
hotel, etc. They are located in Phoenix, Arizona. You can also download a
fully working demo version from their website. It expires is about 30 days,
but you download it again, if you need more time for examination. From an
accounting sense, we use Peachtree Accounting for our purchase orders,
accounts payable, general ledger, etc. It is a great package that sells for
about $149.00, or so. At the end of each month, we transfer Medisoft data
into the general ledger. It works slick and is virtually painless. You are
welcome to visit us and see it in action. We have a small office, but I
would use if for a large company without hesitation. When I was President
of LaForsch, in Dayton, Ohio, we used MedFlex. It is a nice package, but
very expensive, and not really necessary unless you are one of those who
likes to print out report after report to analyze your business. You can
also analyze your business with MediSoft, LCode by LCode, etc., etc. The
Peachtree general ledger and the available reports from MediSoft are all you
really need. Hope this helps.

Wil Haines, CPO
*****
futura does handle a software that can handle all pt. records including
billing

Steve Smith
******
You may be interested in ipocad I, CAD software for O&P design. It is free of
charge after participating in a one-day seminar on the right approach of how
to gather the data (reasonable price for the seminar).
You may want to call ipos at 1-800-626-2612. Ask for Stefie please.

Best regards

Wieland Kaphingst CPO (D)
******
Contact Bill Gustavson at OrthoPartners in Orlando. They have the MedFlex
software program which is designed specifically for O&P. He can be reached
at 877-737-8444.
*****
You might want to contact Orthomerica - They are handling MedFlex (I think
that's the name).
Kandee Stephens
Editor
O & P Business News
*****
Nothing bu great things to say about the OPS system from Futura...
I did my homework in 1994 and did it again this year.
Call them at 727-791-3332 (...I think this is the no.)
Good Luck
JPD
*****
We use a general medical office program and it works well. Another O&P
company here in Michigan also uses it. It's called Thomas and is from
Genius Solutions 248-362-6810.


Ted A. Trower C.P.O.

<Email Address Redacted>

Citation

“Results of Computer Software,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 7, 2024, https://library.drfop.org/items/show/211874.