Re: Laminating Orthoses
Wuersching Andreas
Description
Collection
Title:
Re: Laminating Orthoses
Creator:
Wuersching Andreas
Date:
4/9/1999
Text:
The pro`s for doing orthoses in lamination technique :
you get a stiff and rigid device, thin and light for the customers
comfort.
trick is to use carbon webbings and carbon fibres to reinforce the
braces; this way of manufacturing an orthotic device makes it nessasary
to do a detailed planning before you start doing it.
Dummys for straps, trimlines and areas of reinforcement and areas of
thermoplastic postshapability have to be planed before.
Check only that your joints can be replaced and checked easyly, some
techniques a positioning the joints directly in the lamination brace -
bad luck for you if any service has to be done.... other techniques are
using a Titanium bar system ( small bars about 2,5 ´´ ), the advantage
is you can replace joint or parts of the joints without distroying the
orthoses - quick , easy and save ( reliability ) .
The only real disadvantage of lamination is a volumen change ( I mean
much more )of the customers extremity. Reinforced by carbon fibres a
themoplastic reshaping of the whole orthoses is not possible even
dangerous, by too much heat the laminat will be seperated from the
firbres .
Some suppliers are offering detailed information, lamination kits and
helping tools.
> -----Ursprüngliche Nachricht-----
> Von: Russell DeLaRosa [SMTP: <Email Address Redacted> ]
> Gesendet am: Donnerstag, 8. April 1999 19:01
> An: <Email Address Redacted>
> Betreff: Laminating Orthoses
>
> I am looking for any helpful hints on laminating LE orthoses. A
> couple of
> years ago lamination vs. plastics was a hot topic in O&P Business news
> or
> the Almanac ( I can't recall which publication)and I thought the pro's
> for
> lamination quite intriguing. i am looking forward to any information
> on
> technique and or central fab information.
> Thanks,
> Russell Dela Rosa, CO
you get a stiff and rigid device, thin and light for the customers
comfort.
trick is to use carbon webbings and carbon fibres to reinforce the
braces; this way of manufacturing an orthotic device makes it nessasary
to do a detailed planning before you start doing it.
Dummys for straps, trimlines and areas of reinforcement and areas of
thermoplastic postshapability have to be planed before.
Check only that your joints can be replaced and checked easyly, some
techniques a positioning the joints directly in the lamination brace -
bad luck for you if any service has to be done.... other techniques are
using a Titanium bar system ( small bars about 2,5 ´´ ), the advantage
is you can replace joint or parts of the joints without distroying the
orthoses - quick , easy and save ( reliability ) .
The only real disadvantage of lamination is a volumen change ( I mean
much more )of the customers extremity. Reinforced by carbon fibres a
themoplastic reshaping of the whole orthoses is not possible even
dangerous, by too much heat the laminat will be seperated from the
firbres .
Some suppliers are offering detailed information, lamination kits and
helping tools.
> -----Ursprüngliche Nachricht-----
> Von: Russell DeLaRosa [SMTP: <Email Address Redacted> ]
> Gesendet am: Donnerstag, 8. April 1999 19:01
> An: <Email Address Redacted>
> Betreff: Laminating Orthoses
>
> I am looking for any helpful hints on laminating LE orthoses. A
> couple of
> years ago lamination vs. plastics was a hot topic in O&P Business news
> or
> the Almanac ( I can't recall which publication)and I thought the pro's
> for
> lamination quite intriguing. i am looking forward to any information
> on
> technique and or central fab information.
> Thanks,
> Russell Dela Rosa, CO
Citation
Wuersching Andreas, “Re: Laminating Orthoses,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 15, 2024, https://library.drfop.org/items/show/211478.
