Seeking for research position on prosthetics and biomechanics
Dong Yuzhen
Description
Collection
Title:
Seeking for research position on prosthetics and biomechanics
Creator:
Dong Yuzhen
Date:
11/13/1997
Text:
Hello, OANDP-Lers:
I am a postdoctoral fellow on prosthetics in Singapore, my contract will
end next April. Because Singapore is a small country, the research on
prosthetics and biomechanics is not supported enough, I hope to do
research in this area in other country, e.g. Northern America, as a
postdoctoral fellow (The visa will be approved easily by this position)
or research engineer.
I will be very appreciated if you can give me any help.
My RESUME is pasted on the bottom of this email, and a edition in
MS.Word7.0 for Win95 on PC is also attached.
Thank you very much
Your sincerely
Dong Yuzhen
RESUME OF DR DONG YUZHEN
Birth: 3, Sept. 1965. P.R.China
Address: School of MPE, Nanyang Technological
University
Nanyang Avenue, Singapore 639798
Tel No. 7994784(Office), 2619463(Home)
Email: <Email Address Redacted>
EDUCATION AND RESEARCH BACKGROUND
Apr. 1996---Apr. 1998 Post Doctoral Fellow in Nanyang Technological
University(NTU) in Singapore. Now, I am studying on a MR(Magneto
-rheological) damper which is used for prosthetic knee joint control.
Meanwhile, I am trying to initiate the research of MR fluids
and its applications for NTU. MR fluids are kind of smart fluids whose
rheological properties can be changed when a megnetic field is
applied,
even can be change from liquid state to solid phase in ms.
AutoCAD V13 is used in work.
Feb. 1991--- Sept. 1995 Ph.D. candidate on Mechanical Engineering in
Tsinghua University. Studied on human movement dynamics, a 11 rigid
bodies
system of swing phase and a 12 rigid bodies system of two feet on
ground
stance phase are investigated and work out the kinematic and dynamic
model. Developed a new kind of damper(Using ER fluids) used for
prosthetic knee joint control. With this damper, a intelligent
prosthetic
lower limb(ER-IPLL) was developed. For the control of ER-IPLL, a
micro-NC high voltage supply was invented.
Meanwhile, I also developed a big angular and single direction knee
joint
with weight self-locking. This knee joint is designed for the disable
athletes.
Sept.1986 --- Mar.1989 Graduate student on Mechanical And Production
Engineering in Harbin Institute of Technology, Earned Master degree.
Worked out a multi-CPU system used for control of filament winding
machine
which is used to produce rocket motor house for Aerospace Ministry of
China.
Sept.1982---July, 1986 College student on major of Mechanical And
Production Engineering at Department of Mechanical Engineering,
Shanghai
Institute of Mechanical Engineering(It has been renamed as University
for
Shanghai of Science and Technology) . Awarded Bachelor degree of
engineering
WORK EXPERIENCE
Apr. 1989---Dec. 1990 Electronic and Industrial Engineer at Dept. of
Production Engineering of Radofin Electronic (Far East) Ltd., Shenzhen
Special Economic Zone, P. R. China. Being Responsible for leading a
small
term of 4 assistant engineer and several technician on test jag design
and management, line layout design and tools planing, failure
analysis,
supervising the start-up of new modal includes the PCB line and the
assembly line, etc.. The main products of this company include
cassette
recorder, personal computer, electronic toy, etc.
TEACHING EXPERIENCE
Feb. 1991---Dec. 1993 Dept of Precision Instrument and Mechanology,
Tsinghua University/Beijing. As a assitant lecture for a graduate
course:
Theory of Mechanism.
INTERESTING AND SKILL
Production and Industrial engineering, Mechanical engineering,
Biomechanical engineering and Rehabilitation engineering, smart fluids
and its applications,and management.
PUBLICATIONS
1. A research on the micro-computer control system for filament winding
machine, Dissertation for master degree of Harbin Institute of
Technology,
1989.3. (Chinese)
2. A research on the ER damper suitable for prosthetic knee joint
control,
Proceeding of The First Report Meeting For Rehabilitation Engineering,
Huangshan, Anhui, China, 1993.6. (Chinese)
3. Application of ER fluid in the prosthetic lower limb, Proceedings of
the
International Symposium On Tribology, Beijing, China, Dct.1993.
(English)
4. Research on the NC supply for ER fluid control, China 11th
Conference
on Circuit and Systems, Guilin, Nov.1993. (Chinese)
5. Research on a new tension control system in filament winding
machine,
Journal of Machine Building Automation, Vol. 16, No. 1, 1994.
(Chinese)
6. A study on a micro-NC high voltage supply, Journal of High Voltage
Technology, 1994.12, Vol.20, No.4,p23-25. (Chinese)
7. A new kind of prosthetic knee joint and it clinic application, 7th
Inter.
Rehabilitation Medicine Association Convention, Washington DC,
Apr.9-16,1994. (English)
8. Influence of adjustable friction moment on gait patterns of
prosthetic
knew, 1995 IEEE International Conference On Systems, Man and
Cybernetics,
Vanconver, Canada, Oct.1995. (English)
9. A study on ER intelligent A/K prosthesis, Proceeding of The First
National Symposium On Rehabilitation and Medicine Engineering,
Chongqing,
1995.7, p7. (Chinese)
10. Big angular and single direction knee joint with weight
self-locking,
Proceeding of The First National Symposium On Rehabilitation and
Medicine
Engineering, Chongqing, 1995.7, p10. (Chinese).
11. A study on the mult-rigid-body model of human walking in swing
phase,
Accepted by Chinese Journal Of Biomedical Engineering, English
Version.
12. A research on human walking dynamics and intelligent lower limb
prosthesis, dissertation of Tsinghua University, Aug. 1995.
13. A research on the knee joint damper and intelligent lower
prosthesis, Medical and Biological Engineering and Computing, 1997,
Vol.35, p196.
________________________________________________________
Dr. Dong Yuzhen
School of MPE
Nanyang Technological Univerity
Nanyang Avenue
Singapore 639798
Singapore
Tel: 065-7994784 Fax: 065-7924062
Email: <Email Address Redacted>
________________________________________________________
I am a postdoctoral fellow on prosthetics in Singapore, my contract will
end next April. Because Singapore is a small country, the research on
prosthetics and biomechanics is not supported enough, I hope to do
research in this area in other country, e.g. Northern America, as a
postdoctoral fellow (The visa will be approved easily by this position)
or research engineer.
I will be very appreciated if you can give me any help.
My RESUME is pasted on the bottom of this email, and a edition in
MS.Word7.0 for Win95 on PC is also attached.
Thank you very much
Your sincerely
Dong Yuzhen
RESUME OF DR DONG YUZHEN
Birth: 3, Sept. 1965. P.R.China
Address: School of MPE, Nanyang Technological
University
Nanyang Avenue, Singapore 639798
Tel No. 7994784(Office), 2619463(Home)
Email: <Email Address Redacted>
EDUCATION AND RESEARCH BACKGROUND
Apr. 1996---Apr. 1998 Post Doctoral Fellow in Nanyang Technological
University(NTU) in Singapore. Now, I am studying on a MR(Magneto
-rheological) damper which is used for prosthetic knee joint control.
Meanwhile, I am trying to initiate the research of MR fluids
and its applications for NTU. MR fluids are kind of smart fluids whose
rheological properties can be changed when a megnetic field is
applied,
even can be change from liquid state to solid phase in ms.
AutoCAD V13 is used in work.
Feb. 1991--- Sept. 1995 Ph.D. candidate on Mechanical Engineering in
Tsinghua University. Studied on human movement dynamics, a 11 rigid
bodies
system of swing phase and a 12 rigid bodies system of two feet on
ground
stance phase are investigated and work out the kinematic and dynamic
model. Developed a new kind of damper(Using ER fluids) used for
prosthetic knee joint control. With this damper, a intelligent
prosthetic
lower limb(ER-IPLL) was developed. For the control of ER-IPLL, a
micro-NC high voltage supply was invented.
Meanwhile, I also developed a big angular and single direction knee
joint
with weight self-locking. This knee joint is designed for the disable
athletes.
Sept.1986 --- Mar.1989 Graduate student on Mechanical And Production
Engineering in Harbin Institute of Technology, Earned Master degree.
Worked out a multi-CPU system used for control of filament winding
machine
which is used to produce rocket motor house for Aerospace Ministry of
China.
Sept.1982---July, 1986 College student on major of Mechanical And
Production Engineering at Department of Mechanical Engineering,
Shanghai
Institute of Mechanical Engineering(It has been renamed as University
for
Shanghai of Science and Technology) . Awarded Bachelor degree of
engineering
WORK EXPERIENCE
Apr. 1989---Dec. 1990 Electronic and Industrial Engineer at Dept. of
Production Engineering of Radofin Electronic (Far East) Ltd., Shenzhen
Special Economic Zone, P. R. China. Being Responsible for leading a
small
term of 4 assistant engineer and several technician on test jag design
and management, line layout design and tools planing, failure
analysis,
supervising the start-up of new modal includes the PCB line and the
assembly line, etc.. The main products of this company include
cassette
recorder, personal computer, electronic toy, etc.
TEACHING EXPERIENCE
Feb. 1991---Dec. 1993 Dept of Precision Instrument and Mechanology,
Tsinghua University/Beijing. As a assitant lecture for a graduate
course:
Theory of Mechanism.
INTERESTING AND SKILL
Production and Industrial engineering, Mechanical engineering,
Biomechanical engineering and Rehabilitation engineering, smart fluids
and its applications,and management.
PUBLICATIONS
1. A research on the micro-computer control system for filament winding
machine, Dissertation for master degree of Harbin Institute of
Technology,
1989.3. (Chinese)
2. A research on the ER damper suitable for prosthetic knee joint
control,
Proceeding of The First Report Meeting For Rehabilitation Engineering,
Huangshan, Anhui, China, 1993.6. (Chinese)
3. Application of ER fluid in the prosthetic lower limb, Proceedings of
the
International Symposium On Tribology, Beijing, China, Dct.1993.
(English)
4. Research on the NC supply for ER fluid control, China 11th
Conference
on Circuit and Systems, Guilin, Nov.1993. (Chinese)
5. Research on a new tension control system in filament winding
machine,
Journal of Machine Building Automation, Vol. 16, No. 1, 1994.
(Chinese)
6. A study on a micro-NC high voltage supply, Journal of High Voltage
Technology, 1994.12, Vol.20, No.4,p23-25. (Chinese)
7. A new kind of prosthetic knee joint and it clinic application, 7th
Inter.
Rehabilitation Medicine Association Convention, Washington DC,
Apr.9-16,1994. (English)
8. Influence of adjustable friction moment on gait patterns of
prosthetic
knew, 1995 IEEE International Conference On Systems, Man and
Cybernetics,
Vanconver, Canada, Oct.1995. (English)
9. A study on ER intelligent A/K prosthesis, Proceeding of The First
National Symposium On Rehabilitation and Medicine Engineering,
Chongqing,
1995.7, p7. (Chinese)
10. Big angular and single direction knee joint with weight
self-locking,
Proceeding of The First National Symposium On Rehabilitation and
Medicine
Engineering, Chongqing, 1995.7, p10. (Chinese).
11. A study on the mult-rigid-body model of human walking in swing
phase,
Accepted by Chinese Journal Of Biomedical Engineering, English
Version.
12. A research on human walking dynamics and intelligent lower limb
prosthesis, dissertation of Tsinghua University, Aug. 1995.
13. A research on the knee joint damper and intelligent lower
prosthesis, Medical and Biological Engineering and Computing, 1997,
Vol.35, p196.
________________________________________________________
Dr. Dong Yuzhen
School of MPE
Nanyang Technological Univerity
Nanyang Avenue
Singapore 639798
Singapore
Tel: 065-7994784 Fax: 065-7924062
Email: <Email Address Redacted>
________________________________________________________
Citation
Dong Yuzhen, “Seeking for research position on prosthetics and biomechanics,” Digital Resource Foundation for Orthotics and Prosthetics, accessed November 29, 2024, https://library.drfop.org/items/show/210115.